Home > スポーツ＆フィットネス > スポーツウォッチ > Soleus スポーツウォッチ > Soleus SR017 スポーツウォッチ

説明書 Soleus SR017 スポーツウォッチ

Soleus SR017 スポーツウォッチのマニュアルが必要ですか? 以下では、日本語の PDF マニュアルを無料で表示およびダウンロードできます。この製品には現在、1 件のよくある質問、0 件のコメントがあり、0 件の投票があります。これがご希望のマニュアルではない場合は、お問い合わせください。

ご利用の製品に欠陥があり、マニュアルでは解決出来ない問題ですか。無料の修理サービスを行うRepair Café (Repair Café) に移動します。

説明書

Features:

• 13 digit LCD Screen Displays the hour, minute, second, year (from 2000 to 2099),

month, date, day of the week

• 12-hour/24-hour format selectable. Auto-calendar

• Dual time

• 1/100 second stopwatch (the display range of the stopwatch is 23 hours/59 minutes/59.99

seconds)

• Four groups of alarm. Hourly time signal

• Countdown timer (the maximum display range of countdown time is 23 hours, 59

minutes, 59 seconds)

• Button tone and hourly time signal (on/o synchronized)

•EL backlight (can use “start” button or any other buttons to illuminate the backlight)

Functions

1. In any mode, press A to illuminate EL backlight for 3 seconds

2. In normal time-keeping mode, press C for a short time to turn on/o the hourly time

signal and button tone synchronously, hourly time signal indicator “ “ will appear on

the screen when it is turned on.

In normal timekeeping mode, hold down C for 2 seconds to turn on/o the function

that is the single button with EL backlight or any button with EL backlight. “AEL” indica-

tor will display on the screen when any button with backlight is turned on, in this case,

pressing any button can illuminate the EL backlight.

3. Time 1 Setting

• In Time 1 Mode, “12-hour/24-hour” starts to ash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

• Press D or C to select format between 12-hour and 24-hour format

• Press D to increase the value, hold down D to increase fast

• Press C to decrease the value, hold down C to decrease fast

• Seconds reset to zero by pressing D or C button. At the same time, the time of Time 2

also resets to zero

• Press A button to conrm, and exit from setting, then return to normal timekeeping mode

• In setting mode, the watch will automatically exit setting and then return to Time 1

Mode if you do not perform any button operation within 30 seconds

4. Time 2 Setting

• In Time 2 Mode, “12-hour/2-hour” starts to ash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

• Press D or C to select format between 12-hour and 24-hour

• Press D to decrease the value, hold down D to decrease fast

• Press C to increase the value, hold down C to increase fast

• Seconds reset to zero by pressing D or C. At the same time, the time of Time 1 also

resets to zero.

• Press A to conrm, and exit from setting, then return to normal timekeeping mode

• In setting mode, the watch will automatically exit setting and then return to Time 2

Mode if you do not perform any button operation within 30 seconds

5. Stopwatch Mode

• The display range of the stopwatch is from zero to 23 hours/59 minutes/59.99 seconds

• The stopwatch will restart counting from zero when it reaches its maximum limited

time (23 hours, 59 minutes, 59 seconds)

• Ten groups of LAP time can be recorded

To measure times with the stopwatch

• When entering the stopwatch mode, press D to start/stop counting. Seconds reset to

zero by holding down C for 2 seconds

• Press C to enter LAP timing when stopwatch is running, the screen will display next

LAP time after the previous LAP time for 8 seconds. When 10 groups of LAP times are

recorded fully, the screen icon will appear “FULL” if you continue to press C button. The

previous LAP time will be replaced by the last group of LAP times

• When LAP time is running, press D to stop counting, and press A to enter LAP Recall

Mode. In LAP Recall Mode, press D to view each group of LAP times. Press C to exit LAP

Recall Mode, then return to Stopwatch Mode

• In LAP Recall Mode or when stopwatch is stopped, hold down C for 2 seconds to clear

all previous records

• When stopwatch is running, press B to enter other modes, the stopwatch measure-

ment option is continuous even if you exit the Stopwatch Mode

• When stopwatch is stopped, the watch will automatically return to Time Mode if you

do not perform any button operation within 30 seconds

6. Countdown Mode

• The display range of countdown time is from zero to 23 hours, 59 minutes, 59 seconds

• Three methods of countdown can be selected as shown below:

Countdown Time Setting

• When countdown time is stopped, icon of “STP/ERP” or “CD-UP” starts to ash by

pressing A for 2 seconds, which indicates countdown time setting screen, then press B

to select items in sequence as shown below:

• By pressing D or C you can select any one method among three countdown time

methods: STP, ERP, CD-UP

• Press D to increase the value, hold D down to increase faster

• Press C to decrease the value, hold C down to decrease faster

• Press A to conrm, and exit from setting, then return to countdown time mode

• In setting mode, the watch will automatically exit setting and then return to Time

Mode if you do not perform any button operation within 30 seconds

To measure times with countdown timer

• In countdown mode, press D to start/stop counting. When it’s stopped, press C to

return to the original value

• Countdown time is running when icon “TMR” ashes on the screen. When “TMR” icon

stops ashing, it means countdown has been stopped

• When stopwatch is running, press B to enter other modes, the stopwatch measure-

ment operation is continuous even if you exit the Stopwatch Mode

• With One-time Countdown (STP Mode): the countdown time returns to original value

after it reaches zero. At the same time, alarm tone sounds with “BB-BB” for 30 seconds

then automatically returns to Time Mode. Pressing any button can stop the alarm tone

after it starts to sound. The watch will automatically return to Time Mode if you do not

perform any button operation within 30 seconds

• Repeated Stopwatch (REP Mode): the watch repeats countdown automatically after

the countdown is complete. The maximum range of Auto-Repeated Countdown is 100

times. If the countdown value is set from 1 to 59 seconds, alarm tone will sound with

“BB” when repeated countdown reaches to zero. If Repeated Countdown reaches to

100, the alarm tone will sound with “BB-BB” for 30 seconds, then automatically return

to Timekeeping Mode. If the countdown value is set more than 1 minute, alarm tone

will sound with “BB-BB” for 10 seconds when countdown time reaches zero. Pressing

any button can stop the alarm tone after it starts to sound. The watch will automatically

return to Time Mode if you do not perform any button operation within 30 seconds

• Counting Up (CD-UP Mode): The watch will count up automatically after countdown

time reaches zero, meanwhile, alarm tone will sound with “BB-BB” for 30 seconds, then

automatically return to Time Mode. You can press any button to stop the alarm tone

after it starts to sound. The watch will automatically return to Time Mode if you do not

perform any button operation within 30 seconds

7. Alarm Mode

• In Alarm Mode, press D to view the alarm time among 4 groups. In each group of

alarm mode, press C to turn on/o alarm. Shown below:

Alarm Setting

• In Alarm 1 Mode, hold down A for 2 seconds, “Hour” starts to ash, which indicates

alarm setting screen, then press B button to select item in sequence as shown below:

• Press D to increase the value, hold D down to increase faster

• Press C to decrease the value, hold C down to decrease faster

• Press A to conrm, and exit from setting, then return to Alarm Mode

• In setting mode, the watch will automatically exit setting and then return to Time

Mode if you do not perform any button operation within 30 seconds

• In Alarm Mode, the watch will automatically exit from Alarm Mode, then return to

Time Mode if you do not perform any button operation in 30 seconds

• The setting method for all alarm groups are similar

• When alarm set time is reached, the alarm tone will automatically stop after it sounds

for 30 seconds

Note: Alarm 1 thru 4 will sound only when the current time of Time 1 or Time 2 is

reached. For example, if the current time you chose is in Time 2 Mode, and you do not

change the current time to Time 1 Mode before the alarm tone sounds, the alarm tone

will only sound according to the time of Time 2 Mode

If Time 1 chosen: alarm will ego o in chosen Time Zone you have set the watch in

Caractéristiques:

• L’écran LCD à 13 chires a che l’heure, les minutes, les secondes, l’année (de 2000 à

2099), le mois, la date, le jour de la semaine

• formats 12 heures/24 heures sélectionnables. Calendrier automatique

• Double fuseau horaire

• chronomètre de 1/100 secondes (la plage d’a chage du chronomètre est de 23

heures/59 minutes/59.99 secondes)

• Quatre groupes d’alarmes. Signal des heures

• Compte à rebours (la plage d’a chage maximale du compte à rebours est de 23

heures, 59 minutes, 59 secondes)

• Tonalité et signal des heures (synchronisés activés/désactivés)

• Rétroéclairage EL (appuyer sur la touche “start” ou une autre touche pour allumer le

rétroéclairage)

Fonctions

1. Dans tout mode, appuyer sur A pour allumer le rétroéclairage EL pendant 3 secondes

2. En mode chronométrage normal, appuyer sur C pendant quelques secondes pour

activer/désactiver le signal des heures et la tonalité synchronisés, l’indicateur de

signal des heures “ “ apparaîtra à l’écran lorsqu’il sera activé.

En mode chronométrage normal, appuyer sur C pendant 2 secondes pour activer/

désactiver la fonction de touche unique de rétroéclairage EL ou toute touche avec le

rétroéclairage EL. L’indicateur “AEL” s’a chera à l’écran lorsque la touche de rétroéclai-

rage est activée, et dans ce cas, le rétroéclairage pourra être allumé en appuyant sur

n’importe quelle touche.

3. Réglage du temps 1

• En mode temps 1, appuyer sur A pendant 2 secondes pour faire clignoter “12

heures/24 heures”, qui indique l’écran de réglage du temps 1, appuyer sur B pour

sélectionner les items séquentiels tel qu’illustré ci-dessous:

• Appuyer sur D ou C pour sélectionner le format 12 heures ou 24 heures

• Appuyer sur D pour augmenter la valeur, maintenir D pour augmenter rapidement

• Appuyer sur C pour diminuer la valeur, maintenir C pour diminuer rapidement

• Pour réinitialiser les secondes à zéro, appuyer sur les touches D ou C. Au même mo-

ment, le temps du temps 2 se réinitialise également à zéro

• Appuyer sur la touche A pour conrmer et sortir des réglages, puis revenir en mode

normal de chronomètre

• En mode réglage, la montre sortira automatiquement des réglages et reviendra au

mode temps 1 si vous n’appuyez sur aucune touche pendant 30 secondes

4. Réglage du temps 2

• En mode temps 2, appuyer sur A pendant 2 secondes pour faire clignoter “12

heures/24 heures”, qui indique l’écran de réglage du temps 1, appuyer sur B pour

sélectionner les items séquentiels tel qu’illustré ci-dessous:

• Appuyer sur D ou C pour sélectionner le format 12 heures ou 24 heures

• Appuyer sur D pour diminuer la valeur, maintenir D pour diminuer rapidement

• Appuyer sur C pour augmenter la valeur, maintenir C pour augmenter rapidement

• Pour réinitialiser les secondes à zéro, appuyer sur les touches D ou C. Au même mo-

ment, le temps du temps 1 se réinitialise également à zéro.

• Appuyer sur la touche A pour conrmer et sortir des réglages, puis revenir en mode

normal de chronomètre

• En mode réglage, la montre sortira automatiquement des réglages et reviendra au

mode temps 2 si vous n’appuyez sur aucune touche pendant 30 secondes

5. Mode chronomètre

• La plage d’a chage du chronomètre est de 24 heures/59 minutes/59.99 secondes

• Le chronomètre recommencera à compter à partir de zéro lorsqu’il atteindra la limite

maximale (23 heures, 59 minutes, 59 secondes)

• Dix groupes de tours de piste peuvent être enregistrés

Pour mesurer des temps avec le chronomètre

• Lors de l’entrée en mode chronomètre, appuyer sur D pour démarrer/arrêter le chro-

nomètre. Appuyer sur C pendant 2 secondes pour réinitialiser les secondes à zéro

• Appuyer sur C pour le chronométrage de tours de piste lorsque le chronomètre est

en marche, l’écran a chera le prochain temps de tour après le tour précédent pen-

dant 8 secondes. Lorsque dix groupes de tours de pistes sont complètement enregis-

trés, l’icône à l’écran a chera “COMPLET” si vous continuez d’appuyer sur la touche C.

Le temps de tour précédent sera remplacé par le dernier groupe de dix tours

• Lorsque le temps de tours est en marche, appuyer sur D pour arrêter le chronomètre,

et appuyer sur A pour aller au mode de rappel de tours. En mode de rappel de tour,

appuyer sur D pour voir chaque groupe de temps de tours. Appuyer sur C pour sortir

du mode de rappel de tours, puis revenir au mode chronomètre

• En mode de rappel de tours ou lorsque le chronomètre est arrêté, maintenir le C

pendant 2 secondes pour eacer tous les enregistrements précédents

• Lorsque le chronomètre est en marche, appuyer sur B pour aller aux autres modes;

l’opération de mesure du chronomètre est en continu même si vous sortez du mode

chronomètre

• Lorsque le chronomètre est arrêté, la montre reviendra automatiquement en mode

temps si vous n’appuyez sur aucune touche pendant 30 secondes

6. Temps de compte à rebours

• La plage d’a chage du décompte est de 23 heures/59 minutes/59 secondes

• Trois méthodes de décompte peuvent être sélectionnées tel qu’illustré ci-dessous:

Réglage du temps de décompte

• Lorsque le décompte est arrêté, l’icône “STP/ERP” ou “CD-UP” se met à clignoter si vous

appuyez sur A pendant 2 secondes, ce qui a che l’écran de réglage du temps de décompte,

puis appuyez sur B pour sélectionner les items séquentiels tel qu’illustré ci-dessous:

• En appuyant sur D ou C, vous pouvez sélectionner l’une des trois méthodes de

décompte: STP, ERP, CD-UP

• Appuyer sur D pour augmenter la valeur, maintenir D pour augmenter rapidement

• Appuyer sur C pour diminuer la valeur, maintenir C pour diminuer rapidement

• Appuyer sur la touche A pour conrmer et sortir des réglages, puis revenir en mode

normal de compte à rebours

• En mode réglage, la montre sortira automatiquement des réglages et reviendra au

mode temps si vous n’appuyez sur aucune touche pendant 30 secondes

Pour mesurer les temps avec le compte à rebours

• En mode compte à rebours, appuyer sur D pour démarrer/arrêter le décompte.

Lorsqu’il est arrêté, appuyer sur C pour revenir à la valeur d’origine

• Le temps du compte à rebours est en marche lorsque l’icône “TMR” clignote à l’écran.

Lorsque l’icône “TMR” cesse de clignoter, le compte à rebours est arrêté

• Lorsque le chronomètre est en marche, appuyer sur B pour aller aux autres modes;

l’opération de mesure du chronomètre est en continu même si vous sortez du mode

chronomètre

• Avec le décompte en une fois (Mode STP): le temps du compte à rebours revient

à la valeur d’origine lorsqu’il atteint zéro. Au même moment, la tonalité de l’alarme

résonne avec “BB-BB” pendant 30 secondes puis revient automatiquement en mode

temps. Appuyer sur une touche pour arrêter la tonalité de l’alarme après qu’elle se

soit mise à sonner. La montre reviendra automatiquement au mode temps si vous

n’appuyez sur aucune touche pendant 30 secondes

• Chronomètre à répétition (Mode REP): la montre répète automatiquement le dé-

compte après que le compte à rebours soit terminé. La plage maximale du décompte

à répétition automatique est de 100 fois. Si la valeur du décompte est réglée de 1 à

59 secondes, la sonnerie de l’alarme se fera entendre avec “BB” lorsque le décompte

répété atteindra zéro. Si le décompte à répétition atteint 100, la sonnerie de l’alarme

se fera entendre avec “BB-BB” pendant 30 secondes, puis le mode chronomètre

reviendra automatiquement. Si la valeur du décompte est réglée à plus d’une minute,

la sonnerie de l’alarme avec “BB-BB” se fera entendre pendant 10 secondes lorsque le

temps de décompte atteindra zéro. Appuyer sur une touche pour arrêter la sonnerie

de l’alarme après qu’elle se soit mise à sonner. La montre reviendra automatiquement

au mode temps si vous n’appuyez sur aucune touche pendant 30 secondes

• Mode de comptage (Mode CD-UP): La montre se mettra à compter automatique-

ment après que le décompte ait atteint zéro; pendant ce temps, la sonnerie de

l’alarme se fera entendre avec “BB-BB” pendant 30 secondes, puis retournera

automatiquement en mode temps. Appuyer sur une touche pour arrêter la sonnerie

de l’alarme après qu’elle se soit mise à sonner. La montre reviendra automatiquement

au mode temps si vous n’appuyez sur aucune touche pendant 30 secondes

7. Mode alerte

• En mode alarme, appuyer sur D pour a cher le temps de l’alarme des 4 groupes.

Dans chaque groupe de mode alarme, appuyer sur C pour activer/désactiver l’alarme.

Voir ci-dessous:

Réglage de l’alarme

• En mode alarme 1, maintenir A pendant 2 secondes, “Heure” se mettra à clignoter à

l’écran, puis appuyer sur la touche B pour sélectionner l’item séquentiel tel qu’illustré

ci-dessous:

Funktionen:

• Das 13-stellige LCD-Display zeigt Stunde, Minute, Sekunde, Jahr (2000 bis 2099),

Monat, Datum und Wochentag an

• 12-Stunden/24-Stunden-Format wählbar. Automatischer Kalender

• Zwei Zeitzonen

• 1/100-Sekunden Stoppuhr (der Anzeigebereich der Stoppuhr beträgt 23 Stun-

den/59 Minuten/59.99 Sekunden)

• Vier Alarmgruppen Stundensignal

• Countdown-Timer (maximale Anzeige für Countdown-Zeit: 23 Stunden, 59

Minuten, 59 Sekunden)

• Tastenton und Stundensignal (an/aus synchronisiert)

• EL-Hintergrundbeleuchtung (kann über die “Start”-Taste oder jede beliebige

andere Tasten aktiviert werden)

Funktionen

1. Sie können die EL-Hintergrundbeleuchtung durch Drücken von A in jedem

Modus für 3 Sekunden einschalten

2. Im normalen Zeitmessung-Modus, drücken Sie für eine kurze Zeit C, um das

Stundensignal und den Tastenton gleichzeitig zu aktivieren/deaktivieren. Die

Stundensignal-Anzeige “ “ erscheint auf dem Display, wenn sie eingeschaltet ist.

Halten Sie im normalen Zeitnehmungsmodus die Taste C für 2 Sekunden gedrückt,

um die Funktion ein-/auszuschalten, dass nur mit einer einzigen Taste oder mit

jeder beliebigen Taste die Hintergrundbeleuchtung eingeschaltet werden kann.

Die Anzeige “AEL” auf dem Display zeigt an, wenn die Hintergrundbeleuchtung mit

jeder beliebigen Taste eingeschaltet werden kann, in diesem Fall können Sie durch

das Drücken einer beliebigen Taste die EL-Hintergrundbeleuchtung einschalten.

3. Einstellung Zeit 1

• Im Modus Zeit 1 beginnt die “12-Stunden/24-Stunden”-Anzeige zu blinken,

wenn Sie A für 2 Sekunden gedrückt halten. Sie benden sich nun im Einstel-

lungsmodus für Zeit 1. Drücken Sie B, um die Einstellung wie nachfolgend gezeigt

vorzunehmen:

• Drücken Sie D oder C, um von der 12-Stunden- zur 24-Stunden-Anzeige zu

wechseln

• Drücken Sie D, um die Zeit vorzustellen; für einen schnelleren Vorlauf halten Sie

D gedrückt

• Drücken Sie C, um die Zeit zurückzustellen; für einen schnelleren Rücklauf halten

Sie C gedrückt

• Die Sekunden werden auf 0 zurückgesetzt, wenn Sie D oder C drücken. Gleichze-

itig wird die Zeit von Zeitanzeige 2 auf Null zurückgesetzt

• Drücken Sie A, um Ihre Eingabe zu bestätigen und die Einstellung zu verlassen,

kehren Sie dann in den Normalzeitnehmungs-Modus zurück

• Im Einstellungsmodus verlässt die Uhr automatisch die Einstellung und kehrt

zum Modus Zeit 1 zurück, wenn Sie innerhalb von 30 Sekunden keine Aktion

durchführen

4. Einstellung Zeitzone 2

• Im Modus “Zeitzone 2” beginnt die “12-Stunden/2-Stunden”-Anzeige zu blinken,

wenn Sie A für 2 Sekunden gedrückt halten. Sie benden sich nun im Einstel-

lungsmodus für Zeitzone 1. Drücken Sie B, um die Einstellung vorzunehmen, wie

nachfolgend gezeigt:

• Drücken Sie D oder C, um zwischen der 12-Stunden und der 24-Stunden-Anzeige

zu wechseln

• Drücken Sie D, um die Zeit zurückzustellen. Für einen schnelleren Rücklauf halten

Sie D gedrückt

• Drücken Sie C, um die Zeit vorzustellen, für einen schnelleren Vorlauf halten Sie

C gedrückt

• Die Sekunden werden auf Null zurückgesetzt, wenn Sie D oder C drücken. Glei-

chzeitig wird die Zeit von Zeitzone 1 auf Null zurückgesetzt.

• Drücken Sie A, um Ihre Eingabe zu bestätigen und die Einstellung zu verlassen,

kehren Sie dann in den Normalzeitnehmungs-Modus zurück

• Im Einstellungsmodus verlässt die Uhr automatisch die Einstellung und kehrt

zum Modus “Zeitzone 2” zurück, wenn Sie innerhalb von 30 Sekunden keine Aktion

durchführen

5. Stoppuhr-Modus

• Die Anzeige der Stoppuhr reicht von 0 bis zu 23 Stunden/59 Minuten/59,99

Sekunden

• Die Stoppuhr beginnt von neuem ab Null zu zählen, sobald sie die maixmale Zählzeit

erreicht hat (23 Stunden, 59 Minuten, 59 Sekunden)

• Es können zehn Gruppen von Rundenzeiten genommen werden

Zeitmessung mit der Stoppuhr

• Im Stoppuhr-Modus drücken Sie D, um das Zählen zu starten/zu stoppen. Die Sekun-

den werden auf Null zurückgesetzt, wenn Sie C für 2 Sekunden gedrückt halten

Funzioni:

• Lo schermo LCD a 13 caratteri visualizza l’ora, i minuti, i secondi, l’anno (dal 2000 al

2099), il mese, la data e il giorno della settimana

• Formato 12/24 ore selezionabile Calendario automatico

• Doppio orario

• Cronometro a 1/100 di secondo (l’intervallo visualizzabile è di 23 ore, 59 minuti e

59,99 secondi)

• Quattro gruppi di sveglie Segnale orario a ogni ora

• Timer del conto alla rovescia (l’intervallo massimo visualizzabile è di 23 ore, 59

minuti e 59 secondi)

• Pulsante tono e segnale orario a ogni ora (on/o sincronizzato)

• Retroilluminazione EL (utilizzare il pulsante “Start” o qualsiasi altro pulsante per

attivare la retroilluminazione)

Funzioni

1. In qualsiasi modalità, premere A per attivare la retroilluminazione EL per 3 secondi

2. In modalità ora normale, premere brevemente C e simultaneamente il pulsante

del tono per attivare/disattivare il segnale orario a ogni ora. L’indicatore del segnale

orario a ogni ora “ “ sarà visualizzato sullo schermo quando il segnale è attivo.

In modalità cronometraggio normale, tenere premuto C per 2 secondi per attivare/

disattivare la funzione cioè il solo pulsante con retroilluminazione EL o qualsiasi pul-

sante con retroilluminazione EL. La scritta “AEL” compare sul display quando qualsiasi

pulsante con retroilluminazione viene premuto. In tal caso, la pressione di qualsiasi

pulsante può attivare la retroilluminazione EL.

3. Impostazione Orario 1

• In modalità Orario 1, se si tiene premuto A per 2 secondi, “12-ore/24-ore” inizia a

lampeggiare indicando la schermata di impostazione Orario 1. Premere B per selezi-

onare gli elementi in successione, come mostrato di seguito:

• Premere D o C per selezionare il formato a 12 o 24 ore

• Premere D per aumentare il valore, tenere premuto D per aumentarlo rapidamente

• Premere C per diminuire il valore, tenere premuto C per diminuirlo rapidamente

• Premere il pulsante D o C per azzerare i secondi. Contemporaneamente, anche il

valore di Orario 2 si azzera

• Premere il pulsante A per confermare e uscire dall’impostazione, quindi tornare alla

modalità normale

• Nella modalità di impostazione, in assenza di operazioni per 30 secondi, l’orologio

esce automaticamente dall’impostazione e torna alla modalità Orario 1.

4. Impostazione Orario 2

• In modalità Orario 2, se si tiene premuto A per 2 secondi, “12-ore/2-ore” inizia a lam-

peggiare, indicando la schermata di impostazione Orario 1. Premere B per selezionare

gli elementi in successione, come mostrato di seguito:

• Premere D o C per selezionare il formato a 12 o 24 ore

• Premere D per diminuire il valore, tenere premuto D per diminuirlo rapidamente

• Premere C per aumentare il valore, tenere premuto C per aumentarlo rapidamente

• I secondi si azzerano premendo D o C. Contemporaneamente, anche l’orario di

Orario 1 si azzera.

• Premere A per confermare e uscire dall’impostazione, quindi tornare alla normale

modalità orario

• In modalità impostazione, in assenza di operazioni per 30 secondi, l’orologio uscirà

automaticamente dall’impostazione e tornerà alla modalità Orario 2

5. Modalità Cronometro

• L’intervallo di visualizzazione del cronometro va da zero a 23 ore, 59 minuti e 59,99

secondi

• Una volta raggiunto il suo limite massimo di tempo (23 ore, 59 minuti e 59 secondi),

il cronometro ricomincia a contare da zero

• Possono essere registrati dieci gruppi di tempi su giro.

Misurare i tempi con il cronometro

• Quando si accede alla modalità Cronometro, premere D per avviare/arrestare il

conteggio. I secondi si azzerano tenendo premuto C per 2 secondi

• Premere C per accedere al tempo di giro mentre il cronometro è in funzione. Lo

schermo mostrerà il tempo di giro successivo dopo quello precedente per 8 secondi.

Quando si raggiunge la registrazione completa di 10 gruppi di tempi di giro, continu-

ando a premere il pulsante C sullo schermo compare l’icona “PIENO”. Il tempo di giro

precedente viene sostituito dall’ultimo gruppo di tempi di giro

• Quando il tempo di giro è in scorrimento, premere D per fermare il conteggio, quindi

premere A per accedere alla modalità Richiamo giro. In modalità Richiamo giro,

premere D per visualizzare ogni gruppo di tempi di giro. Premere C per uscire dalla

modalità Richiamo giro, quindi tornare alla modalità Cronometro

• In modalità Richiamo giro o a cronometro fermo, tenere premuto C per 2 secondi

per cancellare tutte le registrazioni precedenti

• Quando il cronometro è in funzione, premere B per passare ad altre modalità,

l’opzione di misura cronometrica è continua anche se si esce dalla modalità crono-

metro

• Quando il cronometro è fermo, se non si preme alcun pulsante per 30 secondi,

l’orologio tornerà automaticamente in modalità Orario

6. Modalità conto alla rovescia

• L’intervallo visualizzato di conto alla rovescia va da zero a 23 ore, 59 minuti e 59 secondi

• Possono essere selezionati tre metodi di conto alla rovescia, come illustrato di seguito:

Impostazione del conto alla rovescia

• Quando il conto alla rovescia viene fermato, premendo A per due secondi l’icona

“STP/ERP” o “CD-UP” inizia a lampeggiare, indicando la schermata di impostazione

del conto alla rovescia, quindi premere B per selezionare le voci in sequenza, come

illustrato di seguito:

• Premere D o C per selezionare uno qualunque dei tre metodi di conto alla rovescia:

STP, ERP, CD-UP

• Premere D per aumentare il valore, tenere premuto D per aumentarlo più rapidamente

• Premere C per diminuire il valore, tenere premuto C per diminuirlo più rapidamente

Características:

• La pantalla LCD de 13 dígitos muestra la hora, los minutos, los segundos, el año

(de 2000 a 2099), el mes, la fecha y el día de la semana

• Formato seleccionable 12 horas/24 horas Calendario automático

• Hora doble

• Cronómetro 1/100 de segundos (el rango de visualización del cronómetro es de

23 horas/59 minutos/59.99 segundos)

• Cuatro grupos de alarma. Señal horaria

• Temporizador regresivo (el rango de visualización máximo del conteo regresivo

es de 23 horas, 59 minutos, 59 segundos)

• Botón de tono y señal horaria (on/o sincronizados)

• Luz de fondo EL (puede usar el botón “inicio” o cualquier otro botón para iluminar

la luz de fondo)

Funciones

1. En cualquier modo, presione A para prender la luz de fondo EL durante 3

segundos

2. En el modo de cronometraje normal, presione C brevemente para activar/

desactivar la señal horaria y el botón de tono de forma sincronizada. El indicador

de señal horaria “ “ aparecerá en la pantalla cuando esté activado.

En el modo de cronometraje normal, mantenga presionado C por 2 segundos

para activar/desactivar la función que es el botón único con retroiluminación EL o

cualquier botón con iluminación a contraluz EL. El indicador “AEL” se mostrará en

pantalla cuando cualquier botón con iluminación a contraluz sea activado, en este

caso, presionar cualquier botón puede encender la retroiluminación EL.

3. Conguración hora 1

• En el modo hora 1, “12/24 horas” comienza a destellar si se mantiene presionado

A durante 2 segundos, que indica la pantalla de ajuste de hora 1, presione B para

seleccionar los elementos de la secuencia como se muestra a continuación:

• Presione D o C para seleccionar el formato de 12 horas y formato de 24 horas

• Presione D para aumentar el valor, mantenga pulsado el botón D para aumentar

rápido

• Presione C para disminuir el valor, mantenga presionado C para disminuir rápido

• Los segundos se restablece desde cero pulsando el botón D o C. Del mismo

modo, el tiempo de Hora 2, también se restablece a cero

• Presione el botón A para conrmar y salga de ajustes, luego vuelva al modo

normal de la hora

• En el modo ajustes, el reloj saldrá automáticamente de los ajustes y volverá al

Modo Hora 1 si no toca ningún botón dentro de 30 segundos

4. Conguración Hora 2

• En el modo Hora 2, “12/24 horas” comienza a parpadear si se mantiene presio-

nado el botón A durante 2 segundos, que indica la pantalla de ajuste de Hora

1, presione B para seleccionar los elementos de la secuencia como se muestra a

continuación:

• Presione D o C para seleccionar el formato entre 12 horas y 24 horas

• Presione D para disminuir el valor, mantenga pulsado el botón D para disminuir

rápido

• Presione C para aumentar el valor, mantenga pulsado el botón C para aumentar

rápido

• Los segundos vuelven a cero pulsando D o C. Al mismo tiempo, el tiempo de Hora

1 también se restablece a cero

• Presione A para conrmar y salga de ajustes, luego vuelva al modo normal de la hora

• En el modo ajustes, el reloj saldrá automáticamente de los ajustes y volverá al

Modo Hora 2 si no toca ningún botón dentro de 30 segundos

5. Modo cronómetro

• El alcance de visualización del cronómetro es de cero a 23 horas/59 minu-

tos/59,99 segundos

• El cronómetro se reiniciará contando desde cero cuando alcanza su límite de

tiempo máximo (23 horas, 59 minutos, 59 segundos).

• Se pueden registrar diez grupos de tiempos de Vuelta

Para medir tiempos con el cronómetro

• Al entrar en el modo del cronómetro, presione D para iniciar y detener el conteo.

Los segundos se reestablecen a cero manteniendo apretado C durante 2 segundos

• Presione C para ingresar el tiempo de Vuelta cuando el cronómetro esté funciona-

ndo, la pantalla mostrará el tiempo de Vuelta siguiente luego del tiempo de Vuelta

anterior durante 8 segundos. Cuando se completa el registro de 10 grupos, en el

icono de la pantalla aparecerá la palabra “FULL” (“COMPLETO”) si usted continúa

pulsando el botón C. El tiempo de vuelta anterior, será reemplazado por el último

grupo de tiempos de vuelta

• Cuando el tiempo de Vuelta está corriendo, presione D para detener el conteo

y presione A para ingresar al Modo Memoria de Vueltas. En Modo Memoria de

Vueltas, presione el botón D para ver cada uno de los grupos de tiempos de vuelta.

Presione C para salir del modo de memoria de vueltas cronometrada y luego

vuelva al modo cronómetro

• En el Modo Memoria de Vueltas o cuando se detenga el cronómetro, mantenga

presionado el botón C durante 2 segundos para borrar todos los registros

• Cuando el cronómetro esté en marcha, pulse B para entrar en otros modos, la

opción de medición del cronómetro es continua, incluso si sale del modo de

cronómetro

• Cuando el cronómetro se detiene, el reloj regresará automáticamente al Modo

Hora si no presiona ningún botón en los siguientes 30 segundos

6. Modo de conteo regresivo

• El rango de visualización del conteo regresivo es de cero a 23 horas, 59 minutos,

59 segundos

• Pueden seleccionarse tres métodos de conteo regresivo como se muestra a

continuación:

Ajuste de horario de cuenta regresiva

• Cuando la cuenta regresiva se detiene, el ícono de “STP/ERP” o “CD-UP” comienza

a parpadear al presionar A durante 2 segundos, lo que el tiempo de conteo

regresivo en la pantalla, luego presione B para seleccionar elementos en secuencia

como se muestra a continuación:

• Al presionar los botones D o C, puede seleccionar cualquiera de los tres métodos

de conteo regresivo: STP, ERP, CD-UP

• Presione D para aumentar el valor, mantenga pulsada la tecla D para aumentar

más rápido

• Presione C para disminuir el valor, mantenga presionado C para disminuir rápido

• Presione el botón A para conrmar y salga de ajustes, luego vuelva al modo de

horario de cuenta regresiva

• En el modo ajustes, el reloj saldrá automáticamente de los ajustes y volverá al

Modo Hora si no presiona ningún botón en 30 segundos

Para medir las horas con el temporizador de cuenta regresiva

• En el modo de cuenta regresiva, presione el botón D para iniciar o detener el

conteo. Cuando está parado, presione C para regresar al valor original

• El horario de conteo regresivo está funcionando cuando el ícono “TMR” parpadea

en la pantalla. Cuando el ícono “TMR” deja de parpadear, signica que la cuenta

regresiva se ha detenido.

• Cuando el cronómetro esté en marcha, presione B para seleccionar otros modos,

la cuenta del cronómetro es continua incluso si usted sale del Modo Cronómetro.

• Con el conteo regresivo de una vez (Modo STP): el tiempo del conteo regresivo

regresa a su valor original después de llegar a cero. Al mismo tiempo, el tono de la

alarma suena con “BB-BB” durante 30 segundos, luego vuelve automáticamente al

Modo Hora. Al pulsar cualquier botón se puede detener el tono de alarma después

que comienza a sonar. El reloj volverá automáticamente al Modo Hora si no toca

ningún botón durante 30 segundos

• Repetida de Cronómetro (REP Mode): el reloj de cuenta regresiva se repite au-

tomáticamente después de nalizar la cuenta. El alcance máximo de Autoconteo

regeresivo es de 100 veces. Si el valor del conteo regresivo es establecido de 1 a

59 segundos, el tono de alarma sonará con “BB” cuando el conteo regresivo en

repetición llegue a cero. Si el Conteo regresivo repetido alcanza los 100, el tono de

la alarma sonará con “BB-BB” durante 30 segundos, luego volverá automática-

mente al Modo Función de hora. Si el valor de la cuenta regresiva se mantiene

más de 1 minuto, el tono de alarma sonará con “BB-BB” por 10 segundos cuando

la cuenta regresiva llegue a cero. Al pulsar cualquier botón se puede detener el

tono de alarma después que comienza a sonar. El reloj volverá al Modo Hora si no

presiona ningún botón en 30 segundos

• Conteo hacia arriba (Modo CD-UP): El reloj contará automáticamente luego de

que la cuenta regresiva haya llegado a cero, mientras el tono de alarma sonará con

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 5 / 7 Edition : A

 The display range of countdown time is from zero to 23 hours, 59 minutes, 59 seconds.

 Three methods of countdown can be selected as shown following:

Countdown Time Setting

 When countdown time is stopped, icon of “STP/ERP” or “CD-UP” starts to flash by pressing A for 2

seconds, which indicates countdown time setting screen, then press B to select items in sequence as

show below:



 Press D or C can select any one method among three countdown time methods (STP) (ERP)

(CD-UP).

 Press D to increase the value, hold down D for some time to increase fast.

 Press C to decrease the value, hold down C for some time to decrease fast.

 Press A to confirm, and exit from setting, then return to countdown time mode.

 In setting mode, the watch will automatically exit setting and then return Time Mode if you do not

perform any button operation in 30 seconds.

To measure times with countdown timer

 In countdown mode, press D to start / stop counting. When it stopped, press C to return to the

original value.

 Countdown time is running when icon “TMR” flashes on the screen. While icon “TMR” stops flashing,

Counting up after countdown

reaches to zero

Stop

Start

Stop

Original value

Button D

B  B 

B 

Countdown time

Seconds

Hours Minutes

Button B

One-time Countdown Time

Repeated Countdown Time

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 5 / 7 Edition : A

 The display range of countdown time is from zero to 23 hours, 59 minutes, 59 seconds.

 Three methods of countdown can be selected as shown following:

Countdown Time Setting

 When countdown time is stopped, icon of “STP/ERP” or “CD-UP” starts to flash by pressing A for 2

seconds, which indicates countdown time setting screen, then press B to select items in sequence as

show below:



 Press D or C can select any one method among three countdown time methods (STP) (ERP)

(CD-UP).

 Press D to increase the value, hold down D for some time to increase fast.

 Press C to decrease the value, hold down C for some time to decrease fast.

 Press A to confirm, and exit from setting, then return to countdown time mode.

 In setting mode, the watch will automatically exit setting and then return Time Mode if you do not

perform any button operation in 30 seconds.

To measure times with countdown timer

 In countdown mode, press D to start / stop counting. When it stopped, press C to return to the

original value.

 Countdown time is running when icon “TMR” flashes on the screen. While icon “TMR” stops flashing,

Counting up after countdown

reaches to zero

Stop

Start

Stop

Original value

Button D

B  B 

B 

Countdown time

Seconds

Hours Minutes

Button B

One-time Countdown Time

Repeated Countdown Time

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 7 / 7 Edition : A

 In Alarm 1 Mode, hold down A for 2 seconds, “Hour” starts to flash, which indicates alarm setting

screen, then press B button to select item in sequence as shown below:

 Press D to increase the value, hold down D for some time to increase fast.

 Press C to decrease the value, hold down C for some time to decrease fast.

 Press A to confirm, and exit from setting, then return to Alarm Mode.

 In setting mode, the watch will automatically exit setting and then return Time Mode if you do not

perform any button operation in 30 seconds.

 In Alarm Mode, the watch will automatically exit from Alarm Mode, then return to Time Mode if

you do not perform any button operation in 30 minutes.

 The setting method of 4 groups of alarm are similar.

 At the state of alarm is turn on, if the alarm time is reached, the alarm tone will automatically stop

after it sounds for 30 seconds.

Remark: 4 groups of alarm will only sound according to the current time of Time 1 or Time 2 is reached. For

example, if the current time you chosen is Time 2 Mode, and you not change the current time to Time 1

before the alarm tone sounds, in this case, the alarm tone will only sound according to the time of Time

2 Mode.



Hour Minute

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 Pag e: 2 / 7 E dition : A

2. In norm al timekeeping m ode, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, hourly time signal indicator

will appear on the screen when it is turned on.

In normal timekeeping mode, hold down C for 2 seconds to turn on / off the function that is the single button with

EL backlight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any button can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

Button B

12H/24H

Hour

Minute

Second

Year

Month-Date / Date-Month

Month

Date

Hourly Time Signal and

Button Tone are turned on

Any button with

EL backlight

Single button w ith

EL backlight

B 

Button B

Button C

B 

Button B

Hourly Time Signal and

Button Tone are turned off

D button for

2 seconds

Button B

SR017

ENGLISH FRANÇAIS (FRENCH)

ESPAÑOL (SPANISH)

ITALIANO (ITALIAN)

DEUTSCH (GERMAN)

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 1 / 7 Edition : A

A . Features

 13 digits LCD Screen displays the hour, minute, second, year (from year 2000 to year 2099), month,

date, day of the week.

 12-hour / 24-hour format selectable. Auto-calendar.

 Dual time.

 1/100 second stopwatch (the display range of the stopwatch is 23 hours 59 minutes 59.99 seconds).

 Four groups of alarm. Hourly time signal.

 Countdown timer (the maximum display range of countdown time is 23 hours 59 minutes 59

seconds.)

 Button tone and hourly time signal.( On / Off synchronized)

 EL backlight. (can use “Start” button or any other buttons to illuminate the backlight).

B . Functions

1. In any mode, press A to illuminate EL backlight for 3 seconds.



Button C

 RESET

Button D

START/STOP

LIGHT/SET

Button A

LMODE



Button B



Time 1 Mode

Alarm Mode

Time 2 Mode

Button B

Stopwatch Mode

Countdown Time Mode

Press & Hold D

for 2 seconds

Button B

Press & Hold D

for 2 seconds

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 1 / 7 Edition : A

A . Features

 13 digits LCD Screen displays the hour, minute, second, year (from year 2000 to year 2099), month,

date, day of the week.

 12-hour / 24-hour format selectable. Auto-calendar.

 Dual time.

 1/100 second stopwatch (the display range of the stopwatch is 23 hours 59 minutes 59.99 seconds).

 Four groups of alarm. Hourly time signal.

 Countdown timer (the maximum display range of countdown time is 23 hours 59 minutes 59

seconds.)

 Button tone and hourly time signal.( On / Off synchronized)

 EL backlight. (can use “Start” button or any other buttons to illuminate the backlight).

B . Functions

1. In any mode, press A to illuminate EL backlight for 3 seconds.

Button C RESET

Button D START/STOP

LIGHT/SETButton A

LMODE Button B

Time 1 Mode

Alarm Mode

Time 2 Mode

Button B Button B

Stopwatch Mode

Countdown Time Mode

Press & Hold D

for 2 seconds

Button B

Press & Hold D

for 2 seconds

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 1 / 7 Edition : A

A . Features

 13 digits LCD Screen displays the hour, minute, second, year (from year 2000 to year 2099), month,

date, day of the week.

 12-hour / 24-hour format selectable. Auto-calendar.

 Dual time.

 1/100 second stopwatch (the display range of the stopwatch is 23 hours 59 minutes 59.99 seconds).

 Four groups of alarm. Hourly time signal.

 Countdown timer (the maximum display range of countdown time is 23 hours 59 minutes 59

seconds.)

 Button tone and hourly time signal.( On / Off synchronized)

 EL backlight. (can use “Start” button or any other buttons to illuminate the backlight).

B . Functions

1. In any mode, press A to illuminate EL backlight for 3 seconds.

Button C RESET

Button D START/STOP

LIGHT/SETButton A

LMODE Button B

Time 1 Mode

Alarm Mode

Time 2 Mode

Button B

Stopwatch Mode

Countdown Time Mode

Press & Hold D

for 2 seconds

Button B

Press & Hold D

for 2 seconds

Swift Manual

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 P age: 2 / 7 Edi tion : A

2. In normal timekeeping mode, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, hourly time signal indicator

will appear on the screen when it is turned on.

In normal timekeeping m ode, hold down C for 2 seconds to turn on / off the function that is the single button with

EL backlight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any button can illum inate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

Button B

12H/24H

Hour

Minute

Second

Year

Month-Date / Date-Month

Month

Date

Hourly Time Signal and

Button Tone are turned on

Any button with

EL backlight

Single button w ith

EL backlight

B 

Button B

Button C

B 

Button B

Hourly Time Signal and

Button Tone are turned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 Page: 2 / 7 Editio n : A

2. In norm al timekeeping mod e, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, ho urly time signal indicator

will appear on t he screen when it is turned on.

In normal tim ekeeping mode, hold down C for 2 seconds to turn on / off the function th at is the single button w ith

EL backl ight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any butto n can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, pre ss B to select the i tems in sequence a s shown below:

Button B

12H/24H

Hour

Minute

Second

Year

Month-Date / Date -Month

Month

Date

Hourly Time Sign al and

Button Tone are t urned on

Any button with

EL backlight

Single button with

EL backlight

B 

Button B

Button C

B 

Button B

Hourly Time Sign al and

Button Tone are t urned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 Page: 2 / 7 Editio n : A

2. In norm al timekeeping mod e, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, ho urly time signal indicator

will appear on t he screen when it is turned on.

In normal tim ekeeping mode, hold down C for 2 seconds to turn on / off the function th at is the single button w ith

EL backl ight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any butto n can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, pre ss B to select the i tems in sequence a s shown below:

Button B

12H/24H

Hour

Minute

Second

Year

Month-Date / Date -Month

Month

Date

Hourly Time Sign al and

Button Tone are t urned on

Any button with

EL backlight

Single button with

EL backlight

B 

Button B

Button C

B 

Button B

Hourly Time Sign al and

Button Tone are t urned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 P age: 2 / 7 E dition : A

2. In normal timekeeping mode, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, hourly time sign al indicator

will appear on the screen when it is turned on.

In normal timekeeping mode, hold down C for 2 seconds to turn on / off the function that is the single button with

EL backlight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any button can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

Button B

12H/24H

Hour

Minute

Second

Year

Month-Date / Date-Month

Month

Date

Hourly Time Signal and

Button Tone are turned on

Any button with

EL backlight

Single button w ith

EL backlight

B 

Button B

Button C

B 

Button B

Hourly Time Signal and

Button Tone are turned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 Model BJF063 Page: 2 / 7 Edition : A

2. In normal timekeeping mode, press C for a short time to tur n on / off the hourly time sign al and button tone

synchronously, ho urly time signal indicator

will appear on the screen when it is turned on.

In normal tim ekeeping mode, hold down C for 2 seconds to turn on / off th e function tha t is the single button with

EL back light or any button with EL backligh t. “AEL” indicator will display on th e screen when any button wi th

backlight is turne d on, in this case, pr essing any button can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hou r / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, p ress B to select th e items in sequen ce as shown below :

Button B

12H/24H

Hour

Minute

Second

Year

Month-Date / Dat e-Month

Month

Date

Hourly Time Sig nal and

Button Tone are turned on

Any button with

EL backlight

Single button wit h

EL backlight

B 

Button B

Button C

B 

Button B

Hourly Time Sig nal and

Button Tone are turned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 P age: 2 / 7 E dition : A

2. In norm al timekeeping mode, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, hourly time signal indicator

will appear on the screen when it is turned on.

In normal timekeeping mode, hold down C for 2 seconds to turn on / off the function that is the single button with

EL backlight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any button can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

Button B

12H/24H Hour Minute Second

Year

Month-Date / Date-Month

Month Date

Hourly Time Signal and

Button Tone are turned on

Any button with

EL backlight

Single button w ith

EL backlight

B 

B  B 

Button B

Button C

B 

Button B

Hourly Time Signal and

Button Tone are turned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 P age: 2 / 7 Ed ition : A

2. In normal timekeeping mode, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, hourly time signal indicator

will appear on the screen when it is turned on.

In normal timekeeping mode, hold down C for 2 seconds to turn on / off the function that is the single button with

EL backlight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any button can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

Button B

12H/24H Hour Minute Second

Year

Month-Date / Date-Month

Month

Date

Hourly Time Signal and

Button Tone are turned on

Any button with

EL backlight

Single button with

EL backlight

B 

B  B 

Button B

Button C

B 

Button B

Hourly Time Signal and

Button Tone are turned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 M odelBJF063 P age: 2 / 7 E dition : A

2. In norm al timekeeping mode, press C for a short time to turn on / off the hourly time signal and button tone

synchronously, hourly time signal indicator

will appear on the screen when it is turned on.

In normal timekeeping mode, hold down C for 2 seconds to turn on / off the function that is the single button with

EL backlight or any button with EL backlight. “AEL” indicator will display on the screen when any button with

backlight is turned on, in this case, pressing any button can illuminate the EL backlight.

3. Time 1 Setting

 In Time 1 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

Button B

12H/24H Hour Minute Second

Year

Month-Date / Date-Month

Month Date

Hourly Time Signal and

Button Tone are turned on

Any button with

EL backlight

Single button w ith

EL backlight

B 

B  B 

Button B

Button C

B 

Button B

Hourly Time Signal and

Button Tone are turned off

D button for

2 seconds

Button B

BJF063(F12-SWIF) MODULE MANUAL

2012 -3-17 ModelBJF063 Page: 3 / 7 Edition : A

 Press D or C to select format between 12-hour and 24-hour format.

 Press D to increase the value, hold down D for some time to increase fast.

 Press C to decrease the value, hold down C for some time to decrease fast.

 Seconds reset to zero by pressing D or C button. At the same time, the time of Time 2 also resets

zero.

 Press A button to confirm, and exit from setting, then return to normal timekeeping mode.

 In setting mode, the watch will automatically exit setting and then return Time 1 Mode if you do not

perform any button operation in 30 seconds.

4. Time 2 Setting

 In Time 2 Mode, “12-hour / 24-hour” starts to flash by holding down A for 2 seconds, which

indicates Time 1 setting screen, press B to select the items in sequence as shown below:

 Press D or C to select format between 12-hour and 24-hour.

 Press D to decrease the value, hold down D for some time to decrease fast.

 Press C button to increase the value, hold down C for some time to increase fast.

 Seconds reset to zero by pressing D or C. At the same time, the time of Time 1 also resets zero.

 Press A to confirm, and exit from setting, then return to normal timekeeping mode.

 In setting mode, the watch will automatically exit setting and then return Time 2 Mode if you do not

perform any button operation in 30 seconds.

5. Stopwatch Mode

 The display range of the stopwatch is from zero to 23 hours 59 minutes 59.99 seconds.

 The stopwatch will restart counting from zero when it reaches its maximum limited (23 hours 59

minutes 59 seconds.)



Ten groups of LAP time can be recorded.

To measure times with the stopwatch

12H/24H

