説明書 Magnat Signature 505 スピーカー

説明書

MAGNAT SIGNATURE 500 LOUDSPEAKERS AS A FRONT OR REAR LOUDSPEAKER

The front loudspeakers are positioned at ear height on the left and right as equidistant from the television

as possible. The rear loudspeakers are placed at ear height or a little above on the left and right besides

or better behind the listening position. (Fig. 4)

BI-WIRING AND BI-AMPING (SIGNATURE 503, 505, 507)

Bi-wiring means using separate cables to carry the high and low audio frequencies. Bi-amping takes this

idea one step further and uses separate power ampliers as well as separate cables for high and low

frequencies. Bi-amping in particular produces an additional improvement in sound reproduction quality.

The special connection terminals of the SIGNATURE 500 loudspeakers support both conventional

connection and operation in bi-wiring and bi-amping modes. There are four screw terminals on each

speaker. The top pair are for the tweeter (high frequencies), the lower pair for the woofer (low frequencies).

The factory-installed metal strips connecting the positive and negative terminals are for conventional

2-wire connection and must be removed for bi-wiring and bi-amping operation. The pictures below show

the correct set-up for conventional operation (Fig. 5a), bi-wiring (Fig. 5b) and bi-amping (Fig. 5c).

MAGNAT SIGNATURE CENTER 53

The SIGNATURE CENTER 53 loudspeaker visually and acoustically ideally matches the other

SIGNATURE 500 models. The loudspeaker is placed immediately on or under the television set.

Otherwise please adhere to the general recommendations outlined in the previous chapters.

MAGNAT SIGNATURE SUB 530A

The SIGNATURE SUB 530A active subwoofer visually and acoustically ideally matches the other

loudspeakers in the SIGNATURE 500 series. Please refer to the separate operating instructions

supplied with this product.

CONNECTING TO AN AV RECEIVER

Fig. 6 shows the connecting to an AV receiver. Please also refer to your receiver‘s/amplifier‘s instructions.

HOW TO AVOID DAMAGE TO YOUR VALUABLE SPEAKERS

All MAGNAT loudspeakers are designed and built for optimum sound reproduction with the tone controls

in the central position – i.e. with “linear” amplier output. Turning up the bass and treble controls too far

delivers more power to the woofers and/or tweeters, and at high volumes this can actually destroy the

speaker units!

If the output of your amplier is signicantly higher than the rated power handling capacity of your

speakers extremely high volumes can physically destroy your speakers. This doesn’t actually happen

often but you should be aware that it is possible.

Weak ampliers with low output ratings can actually be more dangerous for your speakers at medium

volumes because weak ampliers may overload much faster than powerful ones and this causes

measurable and audible distortion, which is extremely dangerous to your loudspeakers.

Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud music

make sure that your amplier can deliver at least as much power as the speakers’ power-handling rating.

8

評価

このマニュアルの詳細

Magnat Signature 505 スピーカー に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Magnat にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Magnat Signature 505 スピーカー の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Magnat スピーカー のすべてのマニュアル
スピーカー のその他のマニュアル

Magnat Signature 505 スピーカー に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。

関連製品

説明書

Magnat Signature 903 スピーカー

説明書

Magnat Interior IWP 82 スピーカー

説明書

Magnat Monitor Supreme 100 スピーカー

説明書

Magnat Interior ICP 82 スピーカー

説明書

Magnat Signature 503 スピーカー

説明書

Magnat Vector 207 スピーカー

説明書

Magnat Quantum Center 816 スピーカー

説明書

Magnat Quantum 803 スピーカー

関連カテゴリ