説明書 Umidigi Uwake 目覚ましライト

説明書

Sleep Aid Function

Before starting the sleep aid function, you need to disconnect Uwake from

other connected devices.

1. Turn on and off sleep aid function

Long touch the icon to turn the sleep aid function on or off (the sleep

aid time defaults to the previous setting)

2. Sleep Aid Time Setting

After the sleep aid function is activated, the sleep aid light is illuminated, the

white noise music sounds, and the middle of the clock “ : ” stops flashing.

Sleep aid time setting: short press the sleep touch icon, you can choose 15

minutes, 30 minutes, 60 minutes of sleep aid time, select OFF will exit the

sleep aid settings.

3. Sleep Aid Music and Volume Settings

In the sleep aid mode, short press the +/- button to switch 6 kinds of white

noise music; long press the +/- button to adjust the sleep music volume

(12 levels); short press the power button to play or pause. when the set

sleep aid time is over, the light is off, the music stops playing, and the clock

“:” returns to normal flashing.

Alarm Mode

Time setting

1. Short press for 3 seconds to select the 12 hour/24 hour format;

2. Press and hold “ ” for 3 seconds and “Hour” will flash. Then click “ ”,

you can choose to adjust “hour” or “minute”, then press +/- button to adjust

“hour” or “minute” (long press +/- to quickly adjust the value);

3. Press and hold " " for 3 seconds or 5 seconds without any operation, you

can set the time and exit time setting.

Special tip: During the setting of the alarm, you should avoid touching the

speaker net or pressing other buttons, otherwise you will not be able to set the

time.

Warranty

1. The warranty period is 1 year since the acquisition date.

2. During the warranty period, if there are any problems or malfunction about

this product in the case of normal use and maintenance, after verification,

we will provide free repair and component replacement.

The following situations are not included in the warranty:

1. Devices, components are beyond the warranty period.

2.Damage caused by abnormal use such as any use, maintenance or wrong

installation not according to the requirements of the product manual.

3.Damage caused by accidents or man-made reasons (Error in operation,

scratch, transfer, bump, inappropriate voltage, and current input, etc)

Product Specification

Product Name: UMIDIG Uwake Music Wake Up Light

Product Model: Uwake

Product Size: 123 × 123 × 118mm

Built-in Battery: 1800mAh

Output Power: 5W

Frequency Response: 80Hz-20kHz

Signal to Noise Ratio: ≥85dB

Communication Distance: about 10 meters (no obstacles)

Precautions

If the finger touches the “speaker net” for a long time (5S or more), the

screen will prompt “Err-”

Special note: In the white noise sleep mode, after Uwake successfully

connects to the wireless device, the sleep aid music will stop playing.

Disconnect the Wireless connection and press the power button

briefly to restart the sleep aid music.

Speaker Mode

1. Connect to Wireless device

Make sure Uwake is turned on and within the scope of the search,

turn on your Wireless and search for "Uwake". When your device is

successfully connected, an indicator sound will be emitted, the

Wireless icon will be on constantly (in the Wireless connection state,

short press the “ M ” button to disconnect).

2. Control Music Playback

When your device is in music mode, short press “ ” to play

orpause, long press “+ ” for 3 seconds to increase the volume, long

press “-” for 3 seconds to decrease the volume. The maximum volume

level of music is V16. . Short press "" to the next song, short press "-"

to the previous track.

Special note: If no device is connected to Uwake, the Wireless symbol

will stop flashing after 3 minutes and go out.

Light settings

You can select the light mode by touching the “speaker net” with your finger.

CL01-CL07 is the colorful light; CL08 is the gradient light, CL09 is the

automatic mode. In this mode, the light can automatically flash with the

music rhythm. Press and hold th"speaker net” for 3 seconds. The clock

turns off the light. Press and hold for 3 seconds to select 3 different light

brightness.

Special tip:

(1)The light will automatically turn off after 9 hours without any operation.

(2) If the finger touches the “speaker net” for a long time (more than 5

seconds), the screen will prompt “Err-”.

Set alarm time

1.Press and hold “ ” for 3 seconds to enter the alarm setting mode, “Hour”

will flash;

2.Then click “ ”, you can choose to adjust “hour” or “minute”, then press the

/- button to set the value of “hour” or “minute” (long press /- to quickly adjust

the value)

3.Press and hold " " for 3 seconds or 5 seconds without any operation, you

can set the time and exit the alarm time setting.

Turn on/off the alarm

Short press the alarm button " " to turn it off, the icon will disappear ; press

the alarm button " " again to turn it on, the alarm icon will be displayed.

Special tip:

1. If the alarm is turned on and the setting is completed, the alarm icon will

light up.

2. When the alarm sounds, press any button (not including the speaker net

and sleep aid button) to get 9 minutes of delayed sleep time and then alarm

again; long press any button for more than 3 seconds to turn off the alarm.

3. During the setting of the alarm, you should avoid touching the speaker net

or pressing other buttons, otherwise the alarm will not be set properly.

User manual

Welcome to use the music wake-up light Uwake (hereinafter referred

to as Uwake). Please read this manual carefully to ensure correct and

safe use.

AM

PM

AM

PM

Product Introduction

Uwake is a wake-up alarm clock with colorful lights.

With super bass, 7 color lights, white noise to help sleep, humanized snooze

and other functions.

Product Description

[Front side]

Operation and display section

Alarm clock on

Sleep aid touch button

Time display

Wireless status indication

M

Speaker net: short press 0.5s to

switch the light effect/ long press to

turn the light on or off

+:

Short press switch to the next

song

long press to increase the volume

:

short press play or paus

long press switch machine

-:

Short press switch to the previous

song

long press to decrease the volume

M:

Short press to turn off wireless

connection

long press to adjust the brightness of the

light

Time button:

short press to switch 12H/24H

Long press to enter time setting

Alarm clock:

short press to turn the alarm on or off.

Long press to enter alarm setting

Charging

Before using the power, please plug the Uwake into the charging cable and

connect the charging adapter to charge (the charging adapter must be at least

5V1A or more). Uwake is built-in battery 1800mAh, when charging with DC5V

1A adapter, it is full for about 3 hours (not recommended to charge through PC)

Special note: When the product is charging, it will be slightly hot, which is

normal.

Turn on/off

When power off/on ,long press power button 3 seconds to turn it on/off

評価

このマニュアルの詳細

Umidigi Uwake 目覚ましライト に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Umidigi にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Umidigi Uwake 目覚ましライト の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Umidigi 目覚ましライト のすべてのマニュアル
目覚ましライト のその他のマニュアル

Umidigi Uwake 目覚ましライト に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。