説明書 Timex TW4B17200ZA Expedition 時計

説明書

2

ENGLISH 931-09500

HOW TO START YOUR WATCH

To start your watch remove the plastic guard from under the crown, then press

the crown in against the case. The second hand will begin advancing in one-

second intervals.

Some deep-depth water-resistant watches require the setting crown to be

screwed in to secure water-resistance. If your watch case has a protrusion with

screw threads, the crown must be screwed in after setting the watch.

To screw in, push the crown rmly against the threaded protrusion and hold

in while turning the crown clockwise. Continue to screw in the crown until it is

tight. You will need to unscrew the crown (counter-clockwise) before pulling it

out the next time you want to set your watch.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking (WR_M) is indicated.

Water-Resistance Depth p.s.i.a. * Water pressure Below Surface

30m/98ft

60

50m/164ft

86

100m/328ft

160

200m/656ft

284

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY

BUTTONS OR PULL OUT THE CROWN UNDER WATER UNLESS YOUR

WATCH IS INDICATED AS 200 METER WATER-RESISTANT.

1. Watch is water-resistant only as long as crystal, crown and case remain

intact.

2. Watch is not a diver watch and should not be used for diving.

3. Rinse watch with fresh water after exposure to salt water.

4. Shock-resistance will be indicated on the watch face or caseback. Watches

are designed to pass ISO test for shock-resistance. However, care should be

taken to avoid damaging the crystal.

INDIGLO

®

NIGHT-LIGHT

Press button to activate light. Electroluminescent technology used in the

INDIGLO

®

night-light illuminates entire watch face at night and in low light

conditions.

ANALOG/DIGITAL MODEL

4-PUSHER ANALOG/DIGITAL MODEL WITH INDIGLO

®

NIGHT-LIGHT &

NIGHT-MODE

®

FEATURE

TO USE INDIGLO

®

NIGHT-LIGHT

1. PRESS pusher “B” to illuminate the entire dial (Both analog and digital).

TO USE NIGHT-MODE

®

FEATURE

1. PRESS and HOLD INDIGLO

®

Button for 3 seconds until you hear a beep.

2. Pressing any pusher will cause the INDIGLO

®

night-light to illuminate and

stay on for 3 seconds.

3. NIGHT-MODE

®

feature will last for 8 hours.

4. To deactivate NIGHT-MODE

®

feature PRESS and HOLD INDIGLO

®

Button

®

for 3 seconds.

ANALOG TIME

TO SET ANALOG TIME

1. PULL the crown out to the “B” position.

2. TURN the crown either way to the correct time.

3. PUSH in the crown to the “A” position.

DIGITAL DISPLAY

1. The Digital display changes to each function every time you PRESS pusher

“A” (As illustrated below):

TIME / CALENDAR

DAILY ALARM

COUNTDOWN TIMER

CHRONOGRAPH

DUAL TIME

START

Press and release MODE

button once.

DUAL TIME CHRONOGRAPH

COUNTDOW N

TIME/

CALENDAR

DAILY

ALARM

TIMER

CALENDAR

HOUR MINUTE SECOND MONTH DATE DAY

Press and release MODE

button once.

Press and release MODE

button once.

TO SET TIME / CALENDAR

CALENDAR

HOUR MINUTE SECOND MONTHDAT

ED

AY

1. PRESS pusher “A” to bring up TIME / CALENDAR display.

2. PRESS and HOLD pusher “D”. HOLD will display until hours ash.

3. PRESS pusher “C” to advance hours.

4. PRESS pusher “A” and “C” as above to adjust minutes, reset seconds to

“00”, month, date, year and 12/24 hour format.

5. PRESS pusher “D” to complete setting.

NOTE: PRESS and HOLD pusher “C” for 2 seconds in setting mode, to

activate fast advance.

View or select the TIME or CALENDAR to appear in your digital display.

1. PRESS pusher “C” to view the CALENDAR for 2 seconds.

2. PRESS and HOLD pusher “C” for 3 seconds until the watch beeps and

changes the display to CALENDAR.

3. To view or change the display to TIME, repeat the steps above.

NOTE:

• “A” or “P” will appear when the 12-Hour format is selected.

• Set this time to coordinate with the Analog time or another time zone.

TO SET DAILY ALARM

FOLLOWED BY

THE CURRENT

ALARM SETTING

TIME AND TIME

ZONE.

WILL

APPEAR

FOR 3

SECONDS

1. PRESS pusher “A” to bring up DAILY ALARM display: “ALARM” will appear

for 3 seconds followed by the current alarm setting time and time zone. The

ALARM mode symbol “AL” and the applicable time zone symbol “T1” or “T2”

alternate to give complete information.

2. PRESS pusher “D” to let time zone ash.

3. PRESS pusher “C” to select time zone.

4. PRESS pusher “A” to let hour ash.

5. PRESS pusher “C” to advance hour.

6. PRESS pusher “A” and “C” as above to adjust the minutes.

7. PRESS pusher “D” to complete setting.

8. Alarm is automatically activated after setting.

C

is displayed.

NOTE: PRESS and HOLD pusher “C” for 2 seconds in setting mode, to

activate fast advance.

NOTE:

• When the alarm sounds, it will beep for 20 seconds.

• To stop the alarm beep, PRESS any pusher.

PUSHER

“B”

PUSHER

“C”

A B

CROWN

POSITION

PUSHER

“A”

PUSHER

“D”

評価

このマニュアルの詳細

Timex TW4B17200ZA Expedition 時計 に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Timex にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Timex TW4B17200ZA Expedition 時計 の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Timex 時計 のすべてのマニュアル
時計 のその他のマニュアル

Timex TW4B17200ZA Expedition 時計 に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。

関連製品

説明書

Timex TW2V40100JT Easy Reader 時計

説明書

Timex TW2V64700JR Expedition 時計

説明書

Timex T2P043 時計

説明書

Timex TW2U90900VQ Waterbury 時計

説明書

Timex TW2V63200ZV Marlin 時計

説明書

Timex TW2V00200JR Expedition 時計

説明書

Timex TW2V00400JR Expedition 時計

説明書

Timex TW2V40000JT Easy Reader 時計

関連カテゴリ