説明書 Qazqa 92303 New York ランプ

説明書

100°

Fig.1(A) Detection R ange

2M

2.0 M

8M

5M

F ig .1(B ) O K F ig.1(C ) N O T G O O D

Fig. 1(D)

Wall

R

oof

North

New York WL Dark Grey

92303

INSTRUCTION MANUAL

Unchangeable LED

Max.4x0.5W LED

3000K±300K

10000H

3 x 1.2V AA

900mAh

Ni-MH

Rechargeable

battery

III

IP44

INTRODUCTION

The L antern Light has a build-in PIR

(Passive Infra Red) sensing device which

continuously scans a preset zone and

automatically switches the light on when it

detects movement in that area. Once

movement is detected within the range of

the sensor the light will switch on

automatically to illuminate pathways,

steps, patios, porches, or whatever area

you have selected to light for reasons of

safety, convenience or security. While

there is movement within range of the unit

the light will remain on.

During the day, the solar panel converts

sunlight into electricity to recharge the

batteries for LED light. This Lantern Light

has an adjustable TIME dial that allows

light duration of up to 90 seconds. When

the batteries are fully charged, it is

estimated that LED can work up to max. 60

times when TIME be set to 1.5 minutes,

totally 1.5 hours.

This unit includes 3 x 1.2V AA 900mAh

Ni-MH Rechargeable battery batteries,

which need to be replaced after 2-years

use, because the charging ability will

decrease.

HAVE YOUR SENSOR WORKED

WELL

To have sensor worked well, we suggest

you take the following points into account:

►

►

►

■ Ideally the Lantern Light should be mounted

1.8 to 2.5 meters (6 to 8ft) above the area to be

scanned (refer to Fig.1A).

■ To avoid damage to unit, do not aim the sensor

towards the sun.

■ To avoid nuisance triggering, the sensor should

be directed away from heat sources such as

barbecues, Air-conditioners, other outside lighting,

moving cars and flue vents.

■ To avoid nuisance triggering, keeping away from

the area of strong electromagnetic disturbance.

■ Do not aim towards reflective surfaces such as

smooth white walls, swimming pools, etc...

■ The sensor scanning specifications (approx. 6

meters at 100°-- round) may vary slightly depending

on the mounting height and location. The detection

range of the unit may also alter with temperature

change. Before selecting a place to install your lantern

light you should note that movement across the scan

area is more effective than movement directly toward

or away from the sensor (refer Fig.1B). If movement is

made walking directly towards or away from the

sensor and not across, the apparent detection range

will be substantially reduced. (refer to Fig. 1C)

CHOOSE LOCATION FOR YOUR LIGHT

■ This light’s power comes

from sunlight. For max sun

exposure and longer light

output, place the solar

panel, connecting to the

light, in a position that

receives at least 4-6 hours

direct sunlight per day.

（refer to Fig. 1D）Ideally,

the solar panel should be

adjusted to the angle facing

the sun. Placing the solar

panel in a shaded location

will not allow the batteries to be charged fully. It will

reduce the number of hours the light operates per

night.

■ This Solar Light is ideal for areas where electricity

is not available, including driveways, garages,

entrance doors, backyard sheds and other remote

areas, for safety and convenience around your home.

222.2 mm

177.1mm

374.4 mm

161.1 mm

127mm

120.3 mm

Fig.2(A)

評価

このマニュアルの詳細

Qazqa 92303 New York ランプ に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Qazqa にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Qazqa 92303 New York ランプ の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Qazqa ランプ のすべてのマニュアル
ランプ のその他のマニュアル

Qazqa 92303 New York ランプ に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。