説明書 Magnat Vector Center 211 スピーカー

説明書

Dear MAGNATCustomer,

Congratulations on your fine new loudspeakers and thank you very much for choosing MAGNAT! You

have madean excellentchoice.The high-qualityspeakers produced byMAGNATare renowned allover

the world.

Please study theinstructions and informationbelow carefully beforeusing your newloudspeakers.

GENERALINFORMATIONABOUTCONNECTINGYOURMAGNAT VECTORLOUDSPEAKERS

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent

impairmentofsoundquality,we recommendcables withcross-sectionsofatleast2.5 mm²forlengths up

to 3 mand at least4 mm²for lengths above3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place

the loudspeakers in their planned positions and cut the cables to the right length. The cables for both

channels should alwaysbe exactly thesame length.

Strip10–15mmofinsulationfromtheendsofthecables.Twisttheends–thisismuchbetterthantinning

them with solder– insert themin the terminalsand tightenthe terminal screwsfirmly. (Fig. 1)

For good sound it is imperative that the cables must be connected in such a way that the speakers are

“in phase”. This means that the black negative terminals on the speakers (-) must be connected to the

negative (-) terminals on the amplifier, the red positive (+) speaker terminals to the positive (+) amplifier

terminals.To makethis easierone wireofmost speakercables ismarked withacoloured stripor aridge

in the insulation.

Beforeswitchingonthesystemdouble-checkallyourconnectionsandmakesurethattheterminalscrews

are tight and that there are no short circuits caused by stray wire filaments – this could cause serious

damage to youramplifier!

THEMAGNATVECTORLOUDSPEAKERS INSTEREOMODE

Intheidealconfigurationthespeakersandthelisteningpositionshouldformanequilateraltriangle.When

theleftandrightspeakersarethesamedistancefromthelisteningpositiontheirsoundarrivesatthesame

time, resulting ina harmonious, naturalmusic reproduction. (Fig.2)

There should be a clear line of sight between the loudspeakers and the listening position. Any sound-

absorbingorreflectingobstaclesin thepath willdistort thesound. Whenyou install theloudspeakers the

following distancesshould be maintained:

Vectorfloorstanders:atleast20 cmawayfrom therearwall andatleast30cmfromthesidewalls.This

will prevent excessiveemphasis of thebass range.

Vectorbookshelfspeakers:shelfloudspeakersshouldalsobeasfree-standingaspossible,thedistance

to the sides and rear to walls and items should be at least 10 cm, the tweeters should be located at ear

height.

Spikes(Vectorfloorstanders): you shoulduse the supplied spikeswhen setting thespeakers up.This

isolates them from the supporting surface, preventing unpleasant resonance effects. You can choose

between metal and hard rubber spikes for the standing speakers. The spikes are screwed into the

threaded bushes onthe bottom ofthe speaker.

MAGNATVECTORLOUDSPEAKERSASAFRONTOR REARLOUDSPEAKER

Thefrontloudspeakers arepositionedatearheight ontheleftand rightasequidistantfromthetelevision

as possible.The rearloudspeakers areplacedat earheight ora little aboveon the left andright besides

or better behindthe listening position.

GB

7

評価

このマニュアルの詳細

Magnat Vector Center 211 スピーカー に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Magnat にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Magnat Vector Center 211 スピーカー の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Magnat スピーカー のすべてのマニュアル
スピーカー のその他のマニュアル

Magnat Vector Center 211 スピーカー に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。

関連製品

説明書

Magnat Signature Center 53 スピーカー

説明書

Magnat Interior IWP 62 スピーカー

説明書

Magnat Quantum 807 スピーカー

説明書

Magnat Vector 201 スピーカー

説明書

Magnat Quantum 1003 スピーカー

説明書

Magnat Quantum 1005 スピーカー

説明書

Magnat Signature 505 スピーカー

説明書

Magnat Vector Center 213 スピーカー

関連カテゴリ