説明書 エドックス 10221-37N-NINJ CO-1 Chronograph 時計

説明書

6

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Correcting the date: pull the crown

out to position 2, turn the crown back-

wards (forwards for references 83) and

push it back to position 1.

Correcting the day for the references

83: pull the crown out to position 2, turn

the crown backwards, then push the

crown to position 1.

3. Time setting: hours, minutes and sec-

onds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown

forwards or backwards. Synchronise the

seconds by pushing the crown back to

position 1 to coincide with a given time

signal.

Power reserve: for references 94: The

small hand places in the counter at 6

o’clock indicates the power reserve. If the

automatic mechanical watch is not worn,

the power reserve lasts for approximate

42 hours. The power reserve can be

increased by winding up the crown manu-

ally in position 1 or while wearing the

watch on the wrist by the rotation of the

oscillation mass.

Movement 805

Watch functions:

The crown has 3 positions:

1. Time setting: pull the crown in posi-

tion 3 (the watch stops), turn the crown

forwards until correct time appears. Push

the crown in position 1.

2. Date setting: pull the crown in posi-

tion 2 and turn the crown forward until

correct date appears. Push the crown in

position 1.

3. Moon setting: pull the crown in

postion 2 and turn it backwards until the

full moon appears in the center of the

moon phase window. Determine the date

of the last full moon with a calendar. Turn

the crown backwards as many moon

phases and days since the last full moon.

This is valid also for the new moon timing.

Push the crown in position 1.

Movement 47, 85, 853

Watch functions:

The crown has 2 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Time setting: hours, minutes and sec-

onds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown for-

wards or backwards. Synchronise the

seconds by pushing the crown back to posi-

tion 1 to coincide with a given time signal.

Movement 87

Watch functions:

The crown has 2 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Time setting: hours and minutes. Pull

the crown out to position 2. Turn the

crown forwards or backwards. Push the

crown back to position 1.

Hand-operating repeater: by pushing

the pusher-button, you start the 5 minutes

repeater mechanism: the first series of

blows strikes the hours (one tone) – the

second series of blows strikes every five

minutes (two tones). For example:

11:43 minutes: first 11 single tones – the

hours – the 8 double tones – the minutes

as 8 x 5 = 40 minutes.

Attention: let the mechanism ring

entirely before activating it again in order

to prevent damages. Do not set the time

when the ring is activated. Edox declines

all responsibilities of misuse.

Movement 90

Watch functions:

The crown has 2 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

Occasional winding: if the watch has not

been worn for more than 42 hours or more,

wind it up with the crown in position 1.

2. Time setting: hours and minutes. Pull

the crown out to position 2. Turn the

crown forwards or backwards. Push the

crown back to position 1.

Moon phase adjustment: press the

push-button C until the full moon appears

in the centre of the moon aperture.

Determine the date of the last full moon by

using a calendar. Press the push-button C

as often as the number of days which

have passed since the last full moon.

Date setting (31 days): press the push-

button D until the centre hand points the

desired day.

評価

このマニュアルの詳細

エドックス 10221-37N-NINJ CO-1 Chronograph 時計 に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Edox にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 エドックス 10221-37N-NINJ CO-1 Chronograph 時計 の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

エドックス 時計 のすべてのマニュアル
時計 のその他のマニュアル

エドックス 10221-37N-NINJ CO-1 Chronograph 時計 に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。

関連製品

説明書

エドックス 08005-37NRCN-NNR Chronorally-S Chronograph Automatic 時計

説明書

エドックス 80500-37R-AIR Les Vauberts La Grande Lune Automatic 時計

説明書

エドックス 10501-37R-GIR Les Bémonts Chronograph Complication 時計

説明書

エドックス 38001-TINV-BUV3 Chronorally chronograph 時計

説明書

エドックス 34500-3-AIN Les Vauberts Date Retrograde 時計

説明書

エドックス 40101-3M-BUIN Les Vauberts Annual Calendar 時計

説明書

エドックス 10109-37NCA-NINO Delfin Chronograph 時計

説明書

エドックス 10302-3V2-BUV3 Chronorally Chronograph 時計

関連カテゴリ