説明書 Dali Rubicon 2 スピーカー

説明書

8

Connection in correct phase is a detail that is often ignored. The red (+) terminal of the amplifier

must be connected to the red (+) terminal of the loudspeaker. The black (-) terminal of the

amplifier must be connected to the black (-) terminal of the loudspeaker (see Figure 9A). Even

a single loudspeaker connected out-of-phase in a stereo or surround installation will make the

bass weaker and the stereo image unfocused.

For the optimal listening experience, the right loudspeaker (as seen from the listening position)

must be connected to the amplifier output terminals marked “R” or “Right”. The left loudspeaker

must be connected to the amplifier output terminals marked “L” or “Left”.

NOTE: Before connecting cables or changing any connections, ALWAYS turn off your amplifier.

NOTE: Make sure that bare conductors are tightly gripped by the terminals with no loose wires

which, could cause a short circuit and damage the amplifier (see Figure 8).

NOTE: If you are using DALI RUBICON in a surround system, follow the instructions included

with your surround amplifier.

4.1 SINGLE-WIRING vs. BI-WIRING/BI-AMPING

All DALI RUBICON speakers can be connected by means of a single speaker cable (see Figure

9A + 9B). However, DALI RUBICON 5, 6 and 8 are fitted with two pairs of terminals, allowing

you the option of running two sets of cables to each speaker. The top terminal pair is internally

connected to the crossover network’s high frequency section. The bottom terminal pair is

internally connected to the crossover network’s bass section.

NOTE: When bi-wiring or bi-amping, ALWAYS remove the metal jumpers between the terminals

before connecting cables (see Figure 9C + 9D).

For bi-wiring, connect two sets of loudspeaker cables, one to the top terminals and one to the

bottom terminals of the speakers. At the amplifier end, connect both sets of loudspeaker cables

to the same pair of terminals on the amplifier (see Figure 9C).

For bi-amping, connect two sets of loudspeaker cables, one to the top terminals and one to the

bottom terminals. At the amplifier end, connect one set of loudspeaker cables to one amplifier,

and connect the other set of cables to the second amplifier (see Figure 9D).

5.0 RUNNING-IN

Like any mechanical system, a loudspeaker requires a “running-in” period to perform at its best.

You will experience a gradual increase in sound quality during the first period of use. The break-in

period will vary depending on use and playback volume. You should expect up to 100 hours of

playback until maximum performance is reached. Unlike other mechanical systems, the life-span

of a loudspeaker is increased by normal, regular playback of music.

6.0 CLEANING & MAINTENANCE

Clean the cabinets with a soft, dry cloth. If the cabinets are dirty, wipe with a soft cloth dipped in

all-purpose cleaner and then well wrung out. Be very careful when wiping the speaker cones,

as they are very fragile. Grille fronts can be cleaned with a clothes brush and wiped with a well

wrung, lint-free cloth and mild all-purpose cleaner.

評価

このマニュアルの詳細

Dali Rubicon 2 スピーカー に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Dali にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Dali Rubicon 2 スピーカー の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Dali スピーカー のすべてのマニュアル
スピーカー のその他のマニュアル

Dali Rubicon 2 スピーカー に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。

関連製品

説明書

Dali Spektor 2 スピーカー

説明書

Dali Menuet スピーカー

説明書

Dali Opticon 1 スピーカー

説明書

Dali Zensor 7 スピーカー

説明書

Dali Opticon 2 スピーカー

説明書

Dali Zensor Vokal スピーカー

説明書

Dali Spektor 1 スピーカー

説明書

Dali Spektor 6 スピーカー

関連カテゴリ