説明書 Dali Rubicon 2 スピーカー

説明書

6

1.0 INTRODUCTION

Congratulations with your new DALI RUBICON loudspeaker. It is important to us that you’re new

DALI loudspeakers are set up and connected optimally. For this reason, we recommend that you

read this manual and follow its instructions.

The manual contains instructions for setup and connection, as well as tips and advice on how

to get the most out of your new loudspeakers. DALI is acclaimed around the world for unique

loudspeakers built to our uncompromising standards for design and performance. The goal

for every single DALI loudspeaker is always our foremost commitment: To create a listening

experience in your home that will make you forget time and place.

Remember to sign up for the DALI newsletter at www.dali-speakers.com.

Enjoy!

2.0 UNPACKING

Be careful not to damage the contents when you unpack the parts. Depending on which DALI

RUBICON model you have bought, different accessories come with the loudspeaker. Check that

all parts are contained in the cardboard box (see Table 1). Keep the packaging materials should

your speaker need to be relocated or serviced.

2.1 GRILLES

The speakers are delivered with the grille fronts already mounted when you unpack them. If

you wish to remove the grille front, loosen it by gradually tugging at the plungers that hold it in

place. It is important that all plunges are equally loosened before removing the front. Otherwise

the grille may be damaged. On the RUBICON 5 the lower contact points are created by magnets

embedded in the grille.

3.0 POSITIONING

To achieve the best results, the loudspeaker setup should be symmetrical round your favourite

listening position, (see Figure 1A – 1C). We recommend that you experiment with the position

of your loudspeakers – the sound quality will change depending on the loudspeaker position.

For DALI RUBICON 2 and DALI RUBICON LCR the speakers should ideally be positioned, so that

the tweeter is approximately at ear height when seated in your favourite listening position.

DALI RUBICON 5, 6 and 8 are designed as floor standing speakers. They should be positioned

minimum 20 cm (8”) from the rear wall. DALI RUBICON 2 should likewise be positioned

minimum 20 cm (8”) from the rear wall. DALI RUBICON LCR is optimized for wall-mounting,

but will also work well on a shelf. If wall mounted there should be at least 10 cm (4”) to any

surface underneath the speaker and if placed on a shelf there should be at least 10 cm (4”)

distance to the wall.

Objects positioned between the speaker and listening position might negatively affect sound

quality. All DALI RUBICON speakers are designed to meet our wide dispersion principle, so they

should not be angled towards the listening position, but be positioned parallel with the rear wall

(see Figure 2). By parallel positioning, the distortion in the main listening area will be lowered

and the room integration will be better. The wide dispersion principle also ensures that sound is

spread evenly within a large area in the listening room.

評価

このマニュアルの詳細

Dali Rubicon 2 スピーカー に紙のマニュアルがあると便利だと理解しています。 マニュアルは当社 Web サイトからいつでもダウンロードして、ご自身で印刷していただけます。 オリジナルのマニュアルが必要な場合は、Dali にお問い合わせいただくことをお勧めします。 オリジナルのマニュアルを提供してくれるかもしれません。 Dali Rubicon 2 スピーカー の別の言語のマニュアルをお探しですか? 当社のホームページでご希望の言語を選択し、モデル番号を検索して入手可能かどうかを確認してください。

仕様

Dali スピーカー のすべてのマニュアル
スピーカー のその他のマニュアル

Dali Rubicon 2 スピーカー に関するよくある質問

当社のサポートチームは有用な製品情報とよくある質問への回答を検索します。よくある質問に誤りがある場合は、お問い合わせフォームを介してお知らせください。

関連製品

説明書

Dali Spektor 2 スピーカー

説明書

Dali Menuet スピーカー

説明書

Dali Opticon 1 スピーカー

説明書

Dali Zensor 7 スピーカー

説明書

Dali Opticon 2 スピーカー

説明書

Dali Zensor Vokal スピーカー

説明書

Dali Spektor 1 スピーカー

説明書

Dali Spektor 6 スピーカー

関連カテゴリ